dmesg - NVIDIA GeForce GTX 660 Ti
Linux version 5.0.0-32-generic (buildd@lgw01-amd64-015) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #34~18.04.2-Ubuntu SMP Thu Oct 10 10:36:02 UTC 2019 (Ubuntu 5.0.0-32.34~18.04.2-generic 5.0.21)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000df531fff] usable
BIOS-e820: [mem 0x00000000df532000-0x00000000df587fff] ACPI NVS
BIOS-e820: [mem 0x00000000df588000-0x00000000df5a7fff] reserved
BIOS-e820: [mem 0x00000000df5a8000-0x00000000df5b8fff] ACPI NVS
BIOS-e820: [mem 0x00000000df5b9000-0x00000000df5ccfff] reserved
BIOS-e820: [mem 0x00000000df5cd000-0x00000000df5cefff] usable
BIOS-e820: [mem 0x00000000df5cf000-0x00000000df5cffff] ACPI NVS
BIOS-e820: [mem 0x00000000df5d0000-0x00000000df5d9fff] reserved
BIOS-e820: [mem 0x00000000df5da000-0x00000000df5e3fff] ACPI NVS
BIOS-e820: [mem 0x00000000df5e4000-0x00000000df640fff] reserved
BIOS-e820: [mem 0x00000000df641000-0x00000000df683fff] ACPI NVS
BIOS-e820: [mem 0x00000000df684000-0x00000000df7fffff] usable
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021dffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x02742018-0x02751c57] usable ==> usable
e820: update [mem 0x02742018-0x02751c57] usable ==> usable
e820: update [mem 0x02a66018-0x02a75857] usable ==> usable
e820: update [mem 0x02a66018-0x02a75857] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x0000000000100000-0x0000000002742017] usable
reserve setup_data: [mem 0x0000000002742018-0x0000000002751c57] usable
reserve setup_data: [mem 0x0000000002751c58-0x0000000002a66017] usable
reserve setup_data: [mem 0x0000000002a66018-0x0000000002a75857] usable
reserve setup_data: [mem 0x0000000002a75858-0x00000000df531fff] usable
reserve setup_data: [mem 0x00000000df532000-0x00000000df587fff] ACPI NVS
reserve setup_data: [mem 0x00000000df588000-0x00000000df5a7fff] reserved
reserve setup_data: [mem 0x00000000df5a8000-0x00000000df5b8fff] ACPI NVS
reserve setup_data: [mem 0x00000000df5b9000-0x00000000df5ccfff] reserved
reserve setup_data: [mem 0x00000000df5cd000-0x00000000df5cefff] usable
reserve setup_data: [mem 0x00000000df5cf000-0x00000000df5cffff] ACPI NVS
reserve setup_data: [mem 0x00000000df5d0000-0x00000000df5d9fff] reserved
reserve setup_data: [mem 0x00000000df5da000-0x00000000df5e3fff] ACPI NVS
reserve setup_data: [mem 0x00000000df5e4000-0x00000000df640fff] reserved
reserve setup_data: [mem 0x00000000df641000-0x00000000df683fff] ACPI NVS
reserve setup_data: [mem 0x00000000df684000-0x00000000df7fffff] usable
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000021dffffff] usable
efi: EFI v2.00 by American Megatrends
efi: SMBIOS=0xdf63fa18 ACPI=0xdf57b000 ACPI 2.0=0xdf57b000 MPS=0xfc9c0
secureboot: Secure boot disabled
SMBIOS 2.6 present.
DMI: System manufacturer System Product Name/P8Q67-M DO/TPM, BIOS 0802 12/26/2011
tsc: Fast TSC calibration using PIT
tsc: Detected 2800.137 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x21e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FE0000000 write-back
2 base 0E0000000 mask FE0000000 uncachable
3 base 21E000000 mask FFE000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 8160M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 6 lose cover RAM: 0G
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcca0-0x000fccaf]
check: Scanning 1 areas for low memory corruption
BRK [0x207e01000, 0x207e01fff] PGTABLE
BRK [0x207e02000, 0x207e02fff] PGTABLE
BRK [0x207e03000, 0x207e03fff] PGTABLE
BRK [0x207e04000, 0x207e04fff] PGTABLE
BRK [0x207e05000, 0x207e05fff] PGTABLE
BRK [0x207e06000, 0x207e06fff] PGTABLE
BRK [0x207e07000, 0x207e07fff] PGTABLE
BRK [0x207e08000, 0x207e08fff] PGTABLE
BRK [0x207e09000, 0x207e09fff] PGTABLE
BRK [0x207e0a000, 0x207e0afff] PGTABLE
BRK [0x207e0b000, 0x207e0bfff] PGTABLE
BRK [0x207e0c000, 0x207e0cfff] PGTABLE
RAMDISK: [mem 0x3a3ca000-0x3dfc1fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DF57B000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DF57B070 00005C (v01 Tarox1 Tarox202 01072009 AMI 00010013)
ACPI: FACP 0x00000000DF5849E0 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DF57B158 009888 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000DF5DBF80 000040
ACPI: APIC 0x00000000DF584AD8 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DF584B50 000102 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 0x00000000DF584C58 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SLIC 0x00000000DF584C98 000176 (v01 Tarox1 Tarox202 00000000 00000000)
ACPI: HPET 0x00000000DF584E10 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: ASF! 0x00000000DF584E48 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021dffffff]
NODE_DATA(0) allocated [mem 0x21dfd3000-0x21dffdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021dffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x00000000df531fff]
node 0: [mem 0x00000000df5cd000-0x00000000df5cefff]
node 0: [mem 0x00000000df684000-0x00000000df7fffff]
node 0: [mem 0x0000000100000000-0x000000021dffffff]
Zeroed struct page in unavailable ranges: 2481 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000021dffffff]
On node 0 totalpages: 2086479
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 14235 pages used for memmap
DMA32 zone: 911024 pages, LIFO batch:63
Normal zone: 18304 pages used for memmap
Normal zone: 1171456 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x02742000-0x02742fff]
PM: Registered nosave memory: [mem 0x02751000-0x02751fff]
PM: Registered nosave memory: [mem 0x02a66000-0x02a66fff]
PM: Registered nosave memory: [mem 0x02a75000-0x02a75fff]
PM: Registered nosave memory: [mem 0xdf532000-0xdf587fff]
PM: Registered nosave memory: [mem 0xdf588000-0xdf5a7fff]
PM: Registered nosave memory: [mem 0xdf5a8000-0xdf5b8fff]
PM: Registered nosave memory: [mem 0xdf5b9000-0xdf5ccfff]
PM: Registered nosave memory: [mem 0xdf5cf000-0xdf5cffff]
PM: Registered nosave memory: [mem 0xdf5d0000-0xdf5d9fff]
PM: Registered nosave memory: [mem 0xdf5da000-0xdf5e3fff]
PM: Registered nosave memory: [mem 0xdf5e4000-0xdf640fff]
PM: Registered nosave memory: [mem 0xdf641000-0xdf683fff]
PM: Registered nosave memory: [mem 0xdf800000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xdf800000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 47 pages/cpu s155648 r8192 d28672 u524288
pcpu-alloc: s155648 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 2053850
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8025908K/8345916K available (14339K kernel code, 2335K rwdata, 4408K rodata, 2588K init, 5192K bss, 320008K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 41617 entries in 163 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
vt handoff: transparent VT on vt#1
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20181213
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285cc223fd9, max_idle_ns: 440795306384 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.27 BogoMIPS (lpj=11200548)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Speculative Store Bypass: Vulnerable
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
Freeing SMP alternatives memory: 36K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-2300 CPU @ 2.80GHz (family: 0x6, model: 0x2a, stepping: 0x7)
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
core: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (22401.09 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xdf532000-0xdf587fff] (352256 bytes)
PM: Registering ACPI NVS region [mem 0xdf5a8000-0xdf5b8fff] (69632 bytes)
PM: Registering ACPI NVS region [mem 0xdf5cf000-0xdf5cffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xdf5da000-0xdf5e3fff] (40960 bytes)
PM: Registering ACPI NVS region [mem 0xdf641000-0xdf683fff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 14:38:43, date: 2020-05-09
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1589035123.040:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9AAF941A4400 00038C (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9AAF94195180 000084 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 8 GPEs in block 00 to 3F
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug LTR]
acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
acpi PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff window] (conflicts with Video ROM [mem 0x000c0000-0x000ce5ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xe4000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb129000-0xfb12900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.2: [8086:1c3c] type 00 class 0x010185
pci 0000:00:16.2: reg 0x10: [io 0xf150-0xf157]
pci 0000:00:16.2: reg 0x14: [io 0xf140-0xf143]
pci 0000:00:16.2: reg 0x18: [io 0xf130-0xf137]
pci 0000:00:16.2: reg 0x1c: [io 0xf120-0xf123]
pci 0000:00:16.2: reg 0x20: [io 0xf110-0xf11f]
pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0xf100-0xf107]
pci 0000:00:16.3: reg 0x14: [mem 0xfb128000-0xfb128fff]
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb100000-0xfb11ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb127000-0xfb127fff]
pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb126000-0xfb1263ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb120000-0xfb123fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb125000-0xfb1253ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1c4e] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xf0f0-0xf0f7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0e0-0xf0e3]
pci 0000:00:1f.2: reg 0x18: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x20: [io 0xf0b0-0xf0bf]
pci 0000:00:1f.2: reg 0x24: [io 0xf0a0-0xf0af]
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb124000-0xfb1240ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.5: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.5: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.5: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.5: reg 0x20: [io 0xf050-0xf05f]
pci 0000:00:1f.5: reg 0x24: [io 0xf040-0xf04f]
pci 0000:01:00.0: [10de:1183] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: BAR 3: assigned to efifb
pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.7: PCI bridge to [bus 03]
pci_bus 0000:04: extended config space not accessible
pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe4000000-0xffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x02742018-0x03ffffff]
e820: reserve RAM buffer [mem 0x02a66018-0x03ffffff]
e820: reserve RAM buffer [mem 0xdf532000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf5cf000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
e820: reserve RAM buffer [mem 0x21e000000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
system 00:07: [io 0x0400-0x0453] has been reserved
system 00:07: [io 0x0458-0x047f] has been reserved
system 00:07: [io 0x1180-0x119f] has been reserved
system 00:07: [io 0x0500-0x057f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:08: [io 0x0454-0x0457] has been reserved
system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.7: PCI bridge to [bus 03]
pci 0000:00:1e.0: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xe4000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 7 [mem 0xe4000000-0xffffffff window]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6a0 took 177189 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6a0 took 175759 usecs
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 61408K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xdb532000-0xdf532000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.28)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
io scheduler mq-deadline registered
pcieport 0000:00:01.0: Signaling PME with IRQ 24
pcieport 0000:00:1c.0: Signaling PME with IRQ 25
pcieport 0000:00:1c.7: Signaling PME with IRQ 26
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xf9000000, using 1876k, total 1875k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
0000:00:16.3: ttyS4 at I/O 0xf100 (irq = 17, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0b0 irq 20
ata2: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf0b8 irq 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf050 irq 20
ata4: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf058 irq 20
scsi host4: ata_generic
scsi host5: ata_generic
ata5: PATA max UDMA/100 cmd 0xf150 ctl 0xf140 bmdma 0xf110 irq 18
ata6: PATA max UDMA/100 cmd 0xf130 ctl 0xf120 bmdma 0xf118 irq 18
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xfb126000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.0.0-32-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb125000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.0.0-32-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: registered as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
mce: Using 9 MCE banks
RAS: Correctable Errors collector initialized.
microcode: sig=0x206a7, pf=0x2, revision=0x1a
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1911510560, 209383)->(1927314413, -15594470)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 8248cf0f90a942a6d35391b2654e2baeb494e1df'
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI db list
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI MokListRT
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI dbx list
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
Magic number: 4:734:636
hash matches /build/linux-hwe-iAAoxd/linux-hwe-5.0.0/drivers/base/power/main.c:1714
rtc_cmos 00:03: setting system clock to 2020-05-09T14:38:45 UTC (1589035125)
tsc: Refined TSC clocksource calibration: 2800.019 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c52c79ef, max_idle_ns: 440795264678 ns
clocksource: Switched to clocksource tsc
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata2.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.01: ATAPI: HL-DT-ST BD-RE BH10LS38, 1.00, max UDMA/133
ata2.00: configured for UDMA/133
ata2.01: configured for UDMA/133
usb 1-1.1: new high-speed USB device number 3 using ehci-pci
usb 2-1.6: new low-speed USB device number 3 using ehci-pci
usb 2-1.6: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.6: Product: USB Keyboard
usb 2-1.6: Manufacturer: Logitech
usb 1-1.1: New USB device found, idVendor=0480, idProduct=0803, bcdDevice= 0.00
usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 1-1.1: Product: External USB 3.0
usb 1-1.1: Manufacturer: TOSHIBA
usb 1-1.1: SerialNumber: 20190824005655F
usb 2-1.8: new high-speed USB device number 4 using ehci-pci
usb 2-1.8: New USB device found, idVendor=058f, idProduct=6364, bcdDevice= 1.00
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.8: Product: Mass Storage Device
usb 2-1.8: Manufacturer: Generic
usb 2-1.8: SerialNumber: 058F63646476
ata1.01: failed to resume link (SControl 0)
ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.01: SATA link down (SStatus 4 SControl 0)
ata1.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
scsi 1:0:1:0: CD-ROM HL-DT-ST BD-RE BH10LS38 1.00 PQ: 0 ANSI: 5
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sr 1:0:1:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr 1:0:1:0: Attached scsi CD-ROM sr0
sr 1:0:1:0: Attached scsi generic sg2 type 5
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2588K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2016K
Freeing unused kernel image memory: 1736K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
usb-storage 1-1.1:1.0: USB Mass Storage device detected
hidraw: raw HID events driver (C) Jiri Kosina
scsi host6: usb-storage 1-1.1:1.0
usb-storage 2-1.8:1.0: USB Mass Storage device detected
scsi host7: usb-storage 2-1.8:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver uas
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:046D:C31C.0001/input/input5
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.6/input0
input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:046D:C31C.0002/input/input6
random: fast init done
input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:046D:C31C.0002/input/input7
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.6/input1
hid-generic 0003:058F:6364.0003: hiddev0,hidraw2: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1d.0-1.8/input1
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f4:6d:04:63:1c:51
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
e1000e 0000:00:19.0 eno1: renamed from eth0
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
scsi 6:0:0:0: Direct-Access TOSHIBA External USB 3.0 0 PQ: 0 ANSI: 6
scsi 7:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi generic sg3 type 0
scsi 7:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
sd 6:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
scsi 7:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
scsi 7:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
sd 7:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 7:0:0:1: Attached scsi generic sg5 type 0
sd 7:0:0:2: Attached scsi generic sg6 type 0
sd 7:0:0:3: Attached scsi generic sg7 type 0
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdd] Attached SCSI removable disk
sd 7:0:0:3: [sdg] Attached SCSI removable disk
sd 7:0:0:1: [sde] Attached SCSI removable disk
sd 7:0:0:2: [sdf] Attached SCSI removable disk
sdc: sdc1
sd 6:0:0:0: [sdc] Attached SCSI disk
raid6: sse2x4 gen() 12452 MB/s
raid6: sse2x4 xor() 8362 MB/s
raid6: sse2x2 gen() 10611 MB/s
raid6: sse2x2 xor() 7254 MB/s
raid6: sse2x1 gen() 9133 MB/s
raid6: sse2x1 xor() 6241 MB/s
raid6: using algorithm sse2x4 gen() 12452 MB/s
raid6: .... xor() 8362 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target System Time Synchronized.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice System Slice.
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
systemd-journald[450]: Received request to flush runtime journal from PID 1
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:02: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP]
lp0: using parport0 (interrupt-driven).
bpfilter: Loaded bpfilter_umh pid 473
systemd-journald[450]: File /var/log/journal/fede3597f8724a62b7726a319d60a6bc/system.journal corrupted or uncleanly shut down, renaming and replacing.
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.SBRG.GPBX) (20181213/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.SBRG.GPBX) (20181213/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.SBRG.GPBX) (20181213/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000050F (\_GPE.GPIO) (20181213/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8
asus_wmi: Number of fans: 1
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
cryptd: max_cpu_qlen set to 1000
IPMI message handler: version 39.2
ipmi device interface
snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x0
snd_hda_codec_via hdaudioC0D0: inputs:
snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
snd_hda_codec_via hdaudioC0D0: Line=0x1b
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
PKCS#7 signature not signed with a trusted key
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia-nvlink: Nvlink Core is being initialized, major device number 238
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 440.59 Thu Jan 30 01:00:41 UTC 2020
Adding 15999996k swap on /dev/sdb2. Priority:-2 extents:1 across:15999996k FS
PKCS#7 signature not signed with a trusted key
PKCS#7 signature not signed with a trusted key
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.59 Thu Jan 30 00:59:18 UTC 2020
PKCS#7 signature not signed with a trusted key
PKCS#7 signature not signed with a trusted key
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
PKCS#7 signature not signed with a trusted key
nvidia-uvm: Loaded the UVM driver, major device number 236.
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: RAPL package 0 domain package locked by BIOS
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1589035151.377:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=901 comm="apparmor_parser"
audit: type=1400 audit(1589035151.377:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=900 comm="apparmor_parser"
audit: type=1400 audit(1589035151.377:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=900 comm="apparmor_parser"
audit: type=1400 audit(1589035151.377:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=900 comm="apparmor_parser"
audit: type=1400 audit(1589035151.485:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=903 comm="apparmor_parser"
audit: type=1400 audit(1589035151.541:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=905 comm="apparmor_parser"
audit: type=1400 audit(1589035151.541:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=898 comm="apparmor_parser"
audit: type=1400 audit(1589035151.541:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=898 comm="apparmor_parser"
audit: type=1400 audit(1589035151.541:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=898 comm="apparmor_parser"
audit: type=1400 audit(1589035151.541:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=898 comm="apparmor_parser"
e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:67db:fd08:a108:66d9 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=582101 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:67db:fd08:a108:66d9 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=255950 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:67db:fd08:a108:66d9 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=582101 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:67db:fd08:a108:66d9 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=255950 PROTO=UDP SPT=8612 DPT=8610 LEN=24
talpa-pedevice: Attached
talpa-vfshook: Patching devtmpfs
talpa-vfshook: Patched devtmpfs
talpa-vfshook: Patching hugetlbfs
talpa-vfshook: Patched hugetlbfs
talpa-vfshook: Patching pstore
talpa-vfshook: Patched pstore
talpa-cache: Enabled
talpa-vfshook: Enabled
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:80:71:7a:c9:e4:31:08:00 SRC=162.125.19.131 DST=192.168.2.103 LEN=116 TOS=0x00 PREC=0x00 TTL=48 ID=9469 DF PROTO=TCP SPT=443 DPT=49240 WINDOW=332 RES=0x00 ACK URGP=0
talpa-vfshook: Patching hugetlbfs
talpa-vfshook: Patched hugetlbfs
talpa-vfshook: atomic_open rescan with file object
talpa-vfshook: atomic_open rescan with file object
talpa-vfshook: atomic_open rescan with file object
talpa-vfshook: Patching hugetlbfs
talpa-vfshook: Patched hugetlbfs
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=805 PROTO=UDP SPT=57316 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=806 PROTO=UDP SPT=59769 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:80:71:7a:c9:e4:31:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=807 PROTO=UDP SPT=60891 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=808 PROTO=UDP SPT=61685 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:80:71:7a:c9:e4:31:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
kauditd_printk_skb: 11 callbacks suppressed
audit: type=1400 audit(1589035401.120:23): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/nvidia/nvidia-application-profiles-440.59-rc" pid=3589 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1589035401.128:24): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/3589/comm" pid=3589 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1589035401.132:25): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/nvidia/nvidia-application-profiles-440.59-rc" pid=3589 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1589035401.132:26): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/3589/comm" pid=3589 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1589035401.140:27): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/modules" pid=3589 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1589035401.140:28): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/driver/nvidia/params" pid=3589 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1589035401.140:29): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/dev/nvidiactl" pid=3589 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=0
audit: type=1400 audit(1589035401.140:30): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/devices/system/memory/block_size_bytes" pid=3589 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1589035401.140:31): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/modules" pid=3589 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1589035401.140:32): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/driver/nvidia/params" pid=3589 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
kauditd_printk_skb: 38 callbacks suppressed
audit: type=1400 audit(1589035407.310:71): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/kme/.xsession-errors" pid=3666 comm="sh" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1589035412.711:72): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/kme/.xsession-errors" pid=3407 comm="pool" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1589035412.715:73): apparmor="ALLOWED" operation="open" profile="libreoffice-oopslash" name="/home/kme/.xsession-errors" pid=3388 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=809 PROTO=UDP SPT=64041 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=810 PROTO=UDP SPT=57811 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:80:71:7a:c9:e4:31:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=811 PROTO=UDP SPT=57857 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=812 PROTO=UDP SPT=53993 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:80:71:7a:c9:e4:31:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=813 PROTO=UDP SPT=53994 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=814 PROTO=UDP SPT=53995 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:80:71:7a:c9:e4:31:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=815 PROTO=UDP SPT=58157 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=816 PROTO=UDP SPT=65041 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:80:71:7a:c9:e4:31:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=817 PROTO=UDP SPT=65042 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=818 PROTO=UDP SPT=65043 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:80:71:7a:c9:e4:31:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=819 PROTO=UDP SPT=65044 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=820 PROTO=UDP SPT=56940 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:80:71:7a:c9:e4:31:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=821 PROTO=UDP SPT=56941 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=822 PROTO=UDP SPT=56942 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:80:71:7a:c9:e4:31:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=823 PROTO=UDP SPT=56943 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=824 PROTO=UDP SPT=56944 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:80:71:7a:c9:e4:31:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=825 PROTO=UDP SPT=63876 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=826 PROTO=UDP SPT=61073 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:80:71:7a:c9:e4:31:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=827 PROTO=UDP SPT=61074 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=828 PROTO=UDP SPT=61075 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:80:71:7a:c9:e4:31:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=829 PROTO=UDP SPT=61076 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=f4:6d:04:63:1c:51:b4:d5:bd:c0:7e:0c:08:00 SRC=192.168.2.107 DST=192.168.2.103 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=830 PROTO=UDP SPT=59209 DPT=2054 LEN=36
[UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:80:71:7a:c9:e4:31:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2